Latest Cisco CCNP Data Center 300-160 EXAM QUESTIONS [Dec-2017 Dumps]

Cisco 300-160 exam is very helpful for applicants to identify Data Connectivity Design Manager, Data Storage Manager and Network Design Engineer. Applicants will also learn how to improve Data Center Infrastructure Design. Applicants, who will clear this 300-160 Cisco Certified Network Professional Data Center certification exam, will receive CCNP Data Center certifications. CCNPtips provides you updated 300-160 exam questions for your 300-160 exam preparation.

300-160 exam questions, 300-160 PDF dumps; 300-160 exam dumps:: https://www.dumpsschool.com/300-160-exam-dumps.html (403 Q&A) (New Questions Are 100% Available! Also Free Practice Test Software!)

Latest and Most Accurate Cisco 300-160 Exam Questions:

Question: 12

You have a Cisco Nexus 5500 Series switch. What is the default load-balancing hash mechanism for traffic on FCoE port channels?

A. the source MAC address
B. the source IP address and the destination IP address
C. the source MAC address and the destination MAC address
D. the source TCP or UDP port and the destination TCP or UDP port

Answer: B

Explanation:
On Nexus 5500 the default load balancing mechanism on the LACP port-channel for FCoE traffic is “source-destination”. In this default state, all the FCoE traffic takes the same link in the port-channel when the Nexus 5500 forwards frames over FCoE VE ports. In order to enable all links to be used in the port-channel for FCoE traffic, enter the port-channel load-balance ethernet source-dest-port command to configure Nexus 5500 “port-channel load balancing” to “source-dest-port”. With this configuration “source-destination-oxid” load balancing is used for FCoE traffic.

Question: 13

Which two characteristics are associated with the access layer of a Data Center Unified Fabric network? (Choose two)

A. voice, data, and wireless convergence
B. no packet manipulation
C. QoS—policing
D. routing manipulation and filtering
E. QoS – classification and queuing

Answer: AE

Question: 14

New Updated 300-160 Exam Questions 300-160 PDF dumps 300-160 practice exam dumps: https://www.dumpsschool.com/300-160-exam-dumps.html

Which option accurately describes the OSPF Graceful Restart feature in Cisco NX-OS?

A. keeps the control plane state active during an OSPF process restart
B. shuts down the OSPF process gracefully to replace the router
C. prevents the OSPF process from restarting when the process crashes
D. allows a router to remain in the data forwarding path during an OSPF process restart

Answer: D

Explanation:
A graceful restart, or nonstop forwarding (NSF), allows OSPFv2 to remain in the data forwarding path through a process restart. When OSPFv2 needs to perform a graceful restart, it sends a link-local opaque (type 9) LSA, called a grace LSA
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/4_2/nx-os/unicast/configuration/guide/l3_cli_nxos/l3_ospf.html#52215

Question: 15

When you configure FCIP, which two types of acceleration can you enable to maximize WAN link utilization? (Choose two)

A. SCSI write
B. link
C. SCSI tape
D. WAN
E. IP

Answer: BD

Explanation:
http://www.cisco.com/en/US/products/ps5989/products_configuration_guide_chapter09186a0080664e20.html

Question: 16

You use Cisco UCS Central to manage Cisco UCS. Which statement accurately describes how local and global policies are applied?

A. A local policy is applied by using Cisco UCS Central, and a global policy is applied by using Cisco UCS Director.
B. A local policy is applied by using Cisco UCS Manager, and a global policy is applied by using Cisco UCS Central.
C. A local policy is applied by using Cisco UCS Director, and a global policy is applied by using Cisco UCS Central.
D. A local policy is applied by using Cisco UCS Central, and a global policy is applied by using Cisco UCS Manager.

Answer: D

Question: 17

Which technology provides additional scalability and simplification of an Ethernet network, providing more efficient forwarding and eliminating the need for the STP?

A. OTV
B. vPC
C. PVST+
D. FabricPath

Answer: D

Question: 18

Which two actions must be performed when you configure Cisco VN-Link in hardware? (Choose two.)

A. Create a distributed virtual switch in Cisco UCS Manager.
B. Add an ESX host to the distributed virtual switch in Cisco UCS Manager.
C. Create a port profile and profile clients in Cisco UCS Manager.
D. Create a standard switch on an ESXi host and map the network adapters to the switch.
E. Create a distributed virtual switch under the datacenter folder in VMware vCenter.

Answer: A, C

Question: 19

You plan to configure LISP between two data centers. Which two LISP components most be configured? (Choose two.)

A. VTEP
B. the site identifier
C. a map resolver
D. a map server
E. VNI

Answer: CD

Explanation:
http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_lisp/configuration/xe-3s/irl-xe-3s-book/irl-cfg-lisp.html

Question: 20

Which two terms relate to the capability of a physical NIC to present virtual NICs to the operating system or hypervisor? (Choose two.)

A. VM-FEX
B. NPIV
C. Adapter-FEX
D. NIV
E. host vPC
F. NIC teaming

Answer: C, D

Facebook Comments